SHOP FIREARM TOOLS

48 of 122 Items
  • Vibra-Tite VC-3 Threadmate - 1mL 21302 Vibra-Tite VC-3 Threadmate - 1mL 21302

    Vibra-Tite VC-3 Threadmate - 1mL

    Vibra-Tite VC-3 Threadmate - 1mL Vibra-Tite VC-3 Threadmate is one of the most versatile threadlockers available on the market. An alternative to traditional liquid lockers which cure to form a hard bond, VC-3 is a proprietary blend of thermoplastic...

    $1.12
    Add to Cart
  • Lyman Pick and Brush Cleaning Set (04038)

    Lyman Pick and Brush Cleaning Set

    Lyman Pick and Brush Cleaning Set Allows you to clean out all those hard to reach grooves and corners that can’t be reached with patches. The picks come in a variety of shapes so that you’ll have just the right size to fit into those tight...

    $4.98
    Add to Cart
  • Vibra-Tite 111 Low Strength Threadlocker - Purple - 1.8 ML (11102)

    Vibra-Tite 111 Low Strength Threadlocker - Purple - 1.8 ML

    Vibra-Tite 111 Low Strength Threadlocker - Purple - 1.8 ML A low strength anaerobic threadlocker designed for locking threaded fasteners smaller than 1/4” in diameter, which require disassembly with standard hand tools. Also works on set screws,...

    $1.49
  • 2011 Magazine Tuning Kit by Dawson Precision (098-001)

    2011 Magazine Tuning Kit by Dawson Precision

    2011 Magazine Tuning Kit by Dawson Precision Now you can tune mags yourself, perfectly! Dave Dawson has designed a tooling package to tune STI Magazines. Dave has long been recognized as The Expert on STI mags. Now you can tune and maintain your own...

    $99.95
    Add to Cart
  • 1911 / 2011 Ejector Pin Drill Bit by Dawson Precision

    1911 / 2011 Ejector Pin Drill Bit by Dawson Precision

    1911 / 2011 Ejector Pin Drill Bit by Dawson Precision Watch this video and work smarter not harder! Dawson Precision (Ejector Pin Drill Bit) uses it’s counter clockwise cutting edge to keep the ejector pulled tight into the frame during the...

    $7.99
  • DAA IPSC & USPSA Magazine Gauge by Double Alpha DAA IPSC & USPSA Magazine Gauge by Double Alpha DAA IPSC & USPSA Magazine Gauge by Double Alpha DAA IPSC & USPSA Magazine Gauge by Double Alpha

    DAA IPSC & USPSA Magazine Gauge by Double Alpha

    DAA IPSC & USPSA Magazine Gauge by Double Alpha The DAA Magazine Gauge is a multi-gauge rolled into one, with a truly international appeal!Both IPSC and USPSA require you to measure the length of long magazines in the Open division. However, IPSC...

    $35.95
  • Real Avid Smart Mag Basepad Removal Tool for Glock (AVGLOCKMT) Real Avid Smart Mag Basepad Removal Tool for Glock (AVGLOCKMT) Real Avid Smart Mag Basepad Removal Tool for Glock (AVGLOCKMT) Real Avid Smart Mag Basepad Removal Tool for Glock (AVGLOCKMT) Real Avid Smart Mag Basepad Removal Tool for Glock (AVGLOCKMT)

    Real Avid Smart Mag Basepad Removal Tool for Glock

    Real Avid Smart Mag Basepad Removal Tool for Glock Change base plates or disassemble Glock magazines for safe and easy cleaning. No fumbling, no need for an extra hand, no out of control springs launching across the room. The Smart Mag Tool for Glock...

    $14.99
    Add to Cart
  • Glock Gen 5 Bench Mat 10064

    Glock Gen 5 Bench Mat

    Gen 5 Exploded Diagram Bench Mat Size: 11" x 17" Material: Rubberized nylon Includes: Gen 5 pistol diagram, parts list, lubrication guide, & Safe Action safety mechanisms Oil resistant surface  

    $12.00
    Add to Cart
  • Loctite 242 Blue Threadlocker Adhesive

    Loctite 242 Blue Threadlocker Adhesive

    Loctite 242 Blue Threadlocker Adhesive Loctite 242 Threadlocker 0.50 ml Capsule  Loctite Threadlocker Blue 242 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product...

    $3.95
    Add to Cart
  • Wheeler FAT Torque Wrench Screwdriver (553556)

    Wheeler FAT Torque Wrench Screwdriver

    Wheeler FAT Torque Wrench Screwdriver Wheeler’s F.A.T. Wrench® (Firearm Accurizing Torque) brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to...

    MSRP: $79.99
    $59.95
    Add to Cart
  • Accu-Punch Hammer & Punch Kit by Real Avid

    Accu-Punch Hammer & Punch Kit by Real Avid

    Accu-Punch Hammer & Punch Kit by Real Avid   Grandpa says, “Use the right tools for the job.” Well, grandpa, these are the right tools. The re imagined hammer has an ergonomic grip and balanced weight to give both precise control...

    $39.99
    Add to Cart
  • DAA Silicon Work Mat (103461) DAA Silicon Work Mat (103461) DAA Silicon Work Mat (103461)

    DAA Silicon Work Mat

    DAA Silicon Work Mat A must-have item on every worktable or reloading bench! The DAA Silicon Work Mat is made larger than most, measuring an impressive 50 x 32 cm (20 x 12.5 inch). The bright Orange colored mat is perfect for keeping all those bits and...

    $22.95
    Add to Cart
  • 1911 Armorer Block by 10-8 Performance (10-8-Block) 1911 Armorer Block by 10-8 Performance (10-8-Block) 1911 Armorer Block by 10-8 Performance (10-8-Block) 1911 Armorer Block by 10-8 Performance (10-8-Block) 1911 Armorer Block by 10-8 Performance (10-8-Block)

    1911 Armorer Block by 10-8 Performance

    1911 Armorer Block by 10-8 Performance Our 1911 Armorer Block is the culmination of years of tinkering on the 1911 and getting by with a box of tools and fixtures that didn't quite do what we wanted.   This 4"x4"x1.25" block is CNC machined from...

    $56.95
  • Lyman Roll Pin Punch Set in 1/16, 3/32, 1/8, 5/32 (7031277) Lyman Roll Pin Punch Set in 1/16, 3/32, 1/8, 5/32 (7031277)

    Lyman Roll Pin Punch Set in 1/16, 3/32, 1/8, 5/32

    Lyman Roll Pin Punch Set in 1/16, 3/32, 1/8, 5/32 Ideal tools for removing hollow, split roll pins. Special round nose design allows proper alignment of punch in roll pin to prevent damage to fine mechanisms such as trigger group parts. Roll Pin Punches...

    $23.95
    Add to Cart
  • Brass Tapper Hammer by Lyman (7031290) Brass Tapper Hammer by Lyman (7031290) Brass Tapper Hammer by Lyman (7031290)

    Brass Tapper Hammer by Lyman

    Brass Tapper Hammer by Lyman The "no-mar" gunsmithing hammer and drift pin For gunsmithing and other delicate jobs, this hammer has three interchangeable heads including nylon, brass and steel. For delicate tapping, a knurled brass drift pin stores...

    $27.95
  • Wheeler 28-Piece Space-Saver Gunsmithing Screwdriver Set (664507)

    Wheeler 28-Piece Space-Saver Gunsmithing Screwdriver Set

    Wheeler 28-Piece Space-Saver Gunsmithing Screwdriver Set Less than half the size of comparable gunsmithing screwdriver sets, the Wheeler® Space Saver Gunsmithing Screwdriver Set takes up very little space on your bench, but contains a durable and...

    MSRP: $15.99
    $14.99
48 of 122 Items

© 2024 Ben Stoeger Pro Shop Powered by BigCommerce All rights reserved. | Sitemap