DAA Mr.BulletFeeder Powder Funnel for Pistol by Double Alpha Academy
Your Mr. Bulletfeeder® is supplied with a newly designed and improved powder funnel. The powder funnel is a very important component of a bullet feeder of any kind, as it prepares the brass correctly so that the bullet can be seated in the case, and not tip over as you index the shell plate. To achieve this, we have redesigned the powder funnel to allow for just the right amount of expansion, without over flaring or stressing your brass. This is included in the Conversion Kit and with the full complete Mr. Bulletfeeder set.
- Uses 7/8" dies
- Will work on any progressive press with a minimum of 4 stations
- Comes with expanding powder funnel for Dillon powder measures
- Available calibers include .223, .308, 40 S&W, 45 ACP, and 9mm
4 Reviews
-
Well worth the money!
I have recently bought a Dillon 550C reloaded and noticed the powder funnel flared the case mouth to much and to shallow no mater how little you tried to make it. This new DAA powder funnel flares the case perfectly like my RCBS die. Bullets sit in the case without any wobble.
-
cure you problems
I was having problems getting way too many culls when I gauged my 9mm ammo loaded on my 550.. After much head scratching I found that the culls were mostly because of the bullet being seated crooked.. This Mr Bullet Feeder funnel all but eliminated the culls.. I rarely endorse things, however, for those loading on 550's or 650's and having a high cull rate this is a must have. The other part of my bullet alignment problem was solved with a Redding bullet seating die..
-
No More Bullet Tipping!!
You don't have to have a Mr. Bullet Feeder to appreciate this funnel. Set the bullet on the brass and it stays there ... no more tipping. Works brass less so it lasts longer.
-
The best expander and funnel
Finally no more bullet damage And no more bronce particules in my crimping die. Final product look great too.
