CZC CZ Shadow 2 & SP-01 - Competition Hammer by CZ Custom 

CZ SA/DA & SA ONLY Competition Hammer (CZ UB Competition Hammer)

This is the HAMMER we use in ALL CZC Custom Pistols

This hammer will fit most models CZ 75 DA / SA and SA ONLY CZ Pistols. When used with SA only guns, do NOT use the DA parts.
Greatly reduces sear creep, lightens and smooths the single action trigger.
Use in conjunction with light main spring (13lb) for smoother lighter DA trigger pull. We also have a mainspring calibration pack available 30165
For further reduced DA trigger pulls we recommend the Longer Firing Pin 10229 and Lighter Firing Pin Springs. 10120
We suggest that the hammer be fitted by a competent gunsmith.
The safety or sear may need to be fitted after installation of the hammer.

Important Note on Hammer Width. Standard CZ 75 Slides have a slide hammer notch width of 0.28" using a hammer width of 0.234". CZ 75 SP01 Shadow, Tactical Sport, and CZ 75 Shadow have a slide hammer notch width of 0.355" using a hammer width of 0.315". Check your slide notch width before ordering. This is the CZ UB (CZECH) Hammer.

Works on SHADOW 2

(Hammer width is 0.234")

Does not work FOR DECOCKER or P07 and P09 or OMEGA