Current Top Sellers
Is there really a difference with Dawson Precision sights? You bet there is! While other sights give off a hazy glow making it difficult to focus, DP sights offer you the sharpest picture. We counterbore the blade so the optic is recessed. This subtle difference focuses the light in the sight making it not only brighter, but clearer. A fully cradled optic provides a longer optic lifespan.
- Counter Bored Optic Keeps Sight Picture Clear and Bright
- Dark Shadow Serrations Blackout Blade and Enhance Optic
- Extra Optic Included - Both Red and Green
- Easy to Install - Tools and Instructions Included
- .160 x .100 is the most popular option
Dawson Precision Front Site
Posted by John on Aug 6th 2018
Bought (2) for a couple of Witness Stock 3's. Went in easy enough. Comes with a small piece of pot metal that goes into the screw recess so the grub screw has something to bottom out on. Both became loose over time. Sight would slide fore and aft slightly but was still captured but waiting for an eventual failure. I had a gun smith fix both sights. Neither is coming out of the slide any time soon. Good small/thin precision fiber optic sight other than that.
Posted by Derrick on Feb 22nd 2018
I've purchased and installed two of thes sights, one on a Witness Hunter 45acp, and the other on a Witness Stock 2 in 10mm. They both went on in a matter of minutes and have greatly improved my sight acquisition. Excellent instructions, extra FO rods in red and green, and a nice nylon punch included. Try a set and improve your groups.
Seeing the Light
Posted by A. White on Nov 4th 2017
I bought this sight mainly due to the fact that your sight eyes will fail you in one way or another with age. This Dawson sight gives me the front sight picture and clarity that i need.
I did not need to sand, file or grind the sight for a proper install.
Note: The set screw is already in [requires thread locker& tightening], the other is an extra.
Quality product, Loose fit.
Posted by Kenny W on Jul 27th 2017
Does everything a front sight is supposed to do, but I've had a couple issues with fitment on my stock 2. One of them being a loose, sloppy fit inside of the dovetail on the slide, and the other being the constant loosening of the sight screw under normal firing of the gun. It only stays tight for about 2-300 rounds tops, regardless of what I put on the screw (silicone, green loctite).
I've used Dawson products in the past with no issue, so I'm assuming it's just bad machining tolerances on Tanfoglio's part. Your mileage may vary.
SAR K2 45
Posted by TCMiles on Apr 18th 2017
Had gunsmith install it on my SAR K2 45acp, worked good.
Awesome product from Dawson as always
Posted by Unknown on Mar 14th 2017
5 star for the Pro Shot crew. They're awesome to deal with and answers any product related questions immediately.
Quality Sight! Easy Installation!
Posted by Sand-Paper-Pistol-Grips.com on Aug 2nd 2016
This is a very high quality front sight that fit my EAA Tanfoglio Witness Match Elite 10mm perfectly. Very much improved sight picture. Fast shipment. Great value! Couldn't be happier or more impressed! I had no trouble installing the sight. The original was a little tough to get out, but they included a nylon tipped punch that made it much easier.
Good to go
Posted by DA on Jul 20th 2016
After receiving the sight I sent it to a gunsmith to have it installed. I was originally going to do it myself but after reading reports of installation issues I sent it to the gunsmith. It looks to be a quality product. I bought the 160h x 100w. The sight comes with instructions to keep it well oiled to avoid rust.
Can't go wrong with Dawson!
Posted by Robert Sepulveda on Jul 5th 2016
easy install, and lots of choices of fiber/height/etc...
easy to install
Posted by Unknown on Jan 15th 2016
replaced factory one,this easy to pick up quickly for my eyes