Current Top Sellers
Redding Pistol Competition Pro Series Die Sets In Titanium Carbide
The “Pro Series”, for use in progressive reloading machines, is a specially prepared three (3) die set. Since the most popular machines do not make use of an expander (TIC) (PRO ST) (CR) die, it has been eliminated in the new “Pro Series” sets. The sizing die is the extraordinary Redding Titanium Carbide, complete with a decapping unit. A superior crimp can be accomplished if it is done in a separate operation from the bullet seating. For this reason the “Pro Series” bullet seating die is designed for bullet seating only, with no crimping feature. Our Profile Crimp die is supplied for the final crimping.
For cartridges that headspace on the case mouth, a Taper Crimp die is substituted. All dies in the set have a special large radius at the mouth for easy case entry, a necessary feature for progressive machines.
Best dies out there
Posted by Unknown on May 11th 2020
I had a lot of problems with my Dillon dies. Not decapping consistently, I had to put a ton of bell on the cases to not shave bullets and try to get them to seat straight, and even then I had 4% fail a chamber check because bullets were not concentric to the case. I gave these dies a shot and all problems are solved, every round plunk tests good. Minimal bell required, and no bullets shaved even using .401 coated bullets. Well worth the money.