Current Top Sellers
CZ P-10 Optic Adapter Plate for Holosun & Trijicon SRO
- Trijicon SRO
- INCLUDES 2 OPTIC PLATE ADAPTER SCREWS, 2 6-32 OPTIC SCREWS
Verify that your pistol is unloaded before attempting any of the following steps.
Plate to Slide
- Remove the two screws from the cover plate on the slide using a T10 driver and remove the cover plate.
- Place the adapter plate onto the slide and secure using the two supplied M3x8 screws, torquing to 12-15 INCH lb. Medium strength threadlocker is recommend.
Sight to Plate
- Place the optic onto the plate and secure using the two supplied 6-48 screws, torquing to 12-15 INCH lb. Medium strength threadlocker is recommended.
*With optic installed, screw protrusion beneath the plate should not exceed 2.3mm (.090”) or damage will occur.