Impact CNC Machine

ICM Springfield Prodigy RMR / SRO / Holosun Adapter Plate by Impact CNC Machine

$75.00
No reviews yet Write a Review

Out of stock

SKU:
2005
Shipping:
Calculated at Checkout

ICM Springfield Prodigy RMR / SRO / Holosun Adapter Plate by Impact CNC Machine

Impact CNC Machine is pleased to offer these Springfield Prodigy Steel Mounts for the following optic footprints:

  • RMR
  • SRO
  • Holosun 507c/508T
  • Holosun 507 Comp

These are made of carbon steel, back up sights are built in to allow lower 1/3 co witness but not block the focal plane. Cerakoted graphite black, comes with mounting screws for each optic. 

Please note: The thread pitch on the plate is 6/32 (where you mount your optic). The thread pitch on your slide (where you mount the plate) is 6/48. The factory short screws (6/48) will work great with this plate. Please do not try to install the screws labeled for each optic in the holes in the slide. As always clean the threads and apply loctite on all threads however we do not recommend red loctite in either case (plate to slide or optic to plate). Blue 242/243 will work well.