UniqueTek Spent Primer Chute for the Dillon 1050 Press
No More Spent Primers on the Floor!
The 1050 Spent Primer Chute™ replaces the plastic spent primer cup on the Dillon Super 1050 reloading press. Spent primers are routed through clear PVC tubing into any convenient waste container. The 1050 Spent Primer Chute™ completely covers the spent primer ejection port, creating a fully enclosed pathway for spent primers ... so they simply can't bounce out!
No more spent primers bouncing out and onto the floor when you reload!
Comes with 3 feet of clear PVC tubing, long enough to route spent primers to a container on, or under, your reloading bench. Route it to a 5-gallon paint pail and you won't need to empty the spent primers for a very long time! You can even drill a 1/2" hole directly under the press, run the PVC tubing through the hole, and place a container under your reloading bench where it is out of the way.
Included:
— 1050 Spent Primer Chute™ - Custom 3D printed in strong, durable black ABS.
— 3 Feet of Clear 1/2" PCV Tubing
— Installation Instructions
Easy Installation:
1. Remove the Spent Primer Cup and Spent Primer Cup Bracket.
2. Position the 1050 Spent Primer Chute™ and attach using the original screw.
3. Attach the tubing to the 1050 Spent Primer Chute™ and route to any convenient container under your reloading bench.
1 Review
-
works well
I was initially concerned when I installed this piece and it did not mate up exactly to the press. It left a gap between the press and the funnel. But so far it has not effected function at all. No primers have escaped and it is very nice to have them all in the bottle under the bench rather than flying all over as they did before with the factory primer bin.
