Sprinco Walther PPQ & PDP TSK Competition Trigger Spring Kit
The Walther Kits work on all P99, PPQ, and PDP Variants, including the Subcompacts and F Series pistols.
Walther PPQ / P99 / PDP "TSK Competition Trigger Spring Kit" Designed with Daniel Thompson of Team Walther, installation of the 2 springs renders a 3.5# Competition ONLY trigger pull. Includes replacement trigger return spring and firing pin safety spring. Moly Plated and Cryogenic Processed for long service life. Works with factory and aftermarket triggers.
18 Reviews
-
Q5 Very nice smooths Trigger out even more better
Installed in my Q5 Match Really liked it picked up a second one for PPQM2 Would not recommend for Carry / great for Total Accuracy and Comp.
-
crazy not to
Great upgrade. Some polishing got rid of the awful grit and the springs gave a really nice 3.2 # pull. Makes it a sweet shooter.
-
Wow what two little springs do
I can't believe that both those spring put into my PPQ Q5 SF dropped the trigger pull from 5.5 lbs to 3 lbs. Wow easy to install and great price to the results. HIGHLY RECOMMEND
-
Does the job
Simple, easy to install trigger spring kit. It drops the trigger pull by 2 lbs.
-
Does exactly what it's supposed to do !
Only took about 15 minutes to install and gives the trigger a much better feel . a cheap investment with a lot of return , would definitely recomend it !
-
Great value - recommend
This delivered as described. It noticeably reduced stock trigger pull weight. It does not affect the slop to the wall or reset distance due to working with the original parts other than these springs. I did read that sometimes the trigger safety needs to be filed down a touch and that proved to be my experience. It was catching/hanging-up if you didn't come onto the trigger perfectly flush. It cost me time during stages as I learned and experienced this first hand.
-
Good Job
The Sprinco spring kit I put in my Walther PPQ lowered the pull weight but only by a little which, is what I wanted. It also seemed to smooth out the trigger pull. Be careful putting the plunger back in when you replace the factory spring. It is very easy for the plunger to come flying out when you are putting the extractor in place. This is one of the few items I've bought that actually made a difference in my gun.
-
Exactly what it says.
Installed the springs per the instructional video online. We measured the trigger pull at about 5.5 to 5.6 on a walther ppq 5 match before the install. And after we pulled a 3.5 to 3.6 So it did exactly what they claim. Very happy.
-
Springco trigger kit
Installed it yesterday & tried it today. Very pleased.
-
Super Light Pull
Good stuff, was considering trigger upgrade but now I dont need to.
-
A Must Have
I installed this in my Q5 polymer, and what a difference. Butter smooth and close to half the trigger pull weight! So, good that I ordered a second one to keep in my range bag.
-
Kick AZZ
Really lightens it up you can tell after installing the top spring also takes a little grit out of the factory 3-1/4 pull Q5 Match