CSRG Multi-Footprint Optic Plate for Glock MOS
Introducing the new CSRG Multi-Footprint Plate for the Glock MOS (Gen 3-5)!
Our Multi-Footprint Plate system uses recoil bosses for secure mounting and precise fit, accepting both an RMR footprint and DPP footprint. All of our plates use 4140 thru-hardened and nitride-finished steel.
We created a comprehensive package with this plate, making sure you have everything you need to mount your optic and get to shooting. Included with every unit:
- 1x Multi-Footprint MOS Plate (RMR/DPP footprint)
- 2x RMR threaded recoil bosses
- 4x DPP threaded recoil bosses
- 2x M3 x 6mm screws (plate-to-slide mounting)
- 2x 6-32 x 3/8" screws (RMR/SRO)
- 2x 6-32 x .308" screws (Holosun 507/407)
- 2x M3 x 9mm screws (Defender XL)
- 1x isopropyl alcohol wipe
Mounting Instructions:
- Degrease with ispropyl alcohol: slide, screws, recoil bosses, and the optic plate.
- Install the plate to the slide using the using the two M3 x 6mm screws and blue loctite (or other medium-strength threadlocker). Torque to 15 in-lb.
- Identify the correct recoil bosses and corresponding holes. The RMR recoil bosses with go to the front-most/furthest apart holes, and the DPP holes will be the ones closer towards the center of the slide (see diagram below). The recoil bosses will accept a 2mm hex drive or small flathead. Tighten them hand-snug with blue loctite. Do not exceed 2 in-lb of torque.
- Install your optic using the appropriate mounting screws and blue loctite. Torque to 15 in-lb.
- Wait 24 hours for the threadlocker to set.
Recoil boss diagram:
DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that
this product is compatible with GLOCK pistols.
DISCLAIMER: “GLOCK” is a federally registered trademark of
GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc.
and GLOCK Ges.m.b.H. Neither Ben Stoeger Pro Shop nor this site are
affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or
GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to
advertise the sale of pistols, parts, components or accessories that are
compatible with GLOCK. For additional genuine GLOCK, Inc. and
GLOCK Ges.m.b.H. products and parts visit www.glock.com.
