Dillon Powder Measure Weight Kit by UniqueTek

This Powder Measure Weight Kit is used in conjunction with the Dillon Low Powder Sensor to add a extra weight to the powder column. This maintains more constant pressure at the bottom of the powder hopper as the powder is consumed ... yielding more consistent powder drop weights.

By adding weight on top of the powder, the weight of the powder column varies less as powder is consumed. The examples below were done using VihtaVuori N350.

Powder Only        1 Powder Weight       2 Powder Weights

Full = 4382.8 gn      Full = 5030.2 gn           Full = 5977.2 gn

Min = 794.8 gn        Min = 1442.0 gn           Min = 2089.7 gn

    ∆ = 81.9%               ∆ = 71.3%                     ∆ = 65.0%

Includes:

2 Brass Powder Measure Weights (1.5 oz each)

1 #10-24 Hex Nut

Q: Can it be used without the Dillon Powder Level Sensor or with other powder measures?

A: Yes! How to do it are included in the Instruction Manual that you can download at the bottom of this page.

TIP: Installing a Quick-Release Failsafe Rod Nut on the rod will allow you to trigger the Low Powder Sensor alarm at any powder level you want. 

Download Instructions, Click Here.

Made in USA.