1911 40 S&W Stainless Steel Flex Magazine Follower by Tripp Research MSRP: Was: Now: $6.95 Add to Cart
Apex Ultimate Striker Block for M&P, M&P M2.0 and M&P Shield MSRP: $40.00 Was: Now: $38.00 Add to Cart
EGW 1911 Oversized Firing Pin Stop Series 70 9/38/40/10 - Stainless Steel MSRP: Was: Now: $20.00 Add to Cart
MBX "Ultra Max" Spring & Follower for 170mm 2011 & Double Stack 1911 MSRP: Was: Now: $19.95 Add to Cart
S&W M&P Optic Plate for Aimpoint ACRO & Steiner MPS by Forward Controls Design MSRP: Was: Now: $80.35 Add to Cart
Springfield Armory Prodigy Optic Adapter Plate for EOTECH EFLX by CHPWS MSRP: Was: Now: $137.45 Add to Cart
EGW 1911 Oversized Firing Pin Stop Series 70 9/38/40/10 - Blued EGW 1911 Oversized Firing Pin Stop Series 70 9/38/40/10 - Blue Material: Carbon SteelCaliber: 9/38/40/10mmSeries: 70Hardness: 48 RcDrop In: NoEGW firing pin stops are wider than normal to prevent extractor from turning, which... MSRP: Was: Now: $15.00 Add to Cart
JP Enhanced Reliability Spring Kit JP Enhanced Reliability Spring Kit This spring kit will yield a 3.5-4.0 lb. trigger pull with JP Fire Control parts. This kit is intended for use with JP trigger parts and will not necessarily yield substantial change on standard AR-15 trigger... MSRP: Was: Now: $10.95 Add to Cart
Rock Island "Fattie" Speed Magwell by Taylor Freelance Taylor Freelance Rock Island "Fattie" Speed Magwell -- MUCH wider reloading funnel -- More than twice as deep as the factory part -- Increases effective frame length, giving your support hand better control -- Aluminum construction = light weight --... MSRP: Was: Now: $59.95 Choose Options
S&W M&P Y-Notch Rear Sight by Frank Proctor S&W M&P Y-Notch Rear Sight by Frank Proctor Proctor Y Notch Sights are designed to be Fast Accurate Easy. The main premise behind the design is allowing fast easy vision with less room for sight misalignment. The Y shaped notch... MSRP: $79.00 Was: Now: $29.00 Add to Cart
Springfield Prodigy 5" Enhanced Guide Rod Kit by EGW Springfield Prodigy 5" Enhanced Guide Rod Kit by EGW Enhanced Guide Rod Kit for Springfield Prodigy 5" – .332" Hole | Tungsten Upgrade for Reduced Recoil Upgrade your Springfield Prodigy 5” with our Enhanced Guide Rod Kit,... MSRP: Was: Now: $129.99 Add to Cart
Trigger Return Spring Kit for Flat Trigger System by Henning Trigger Return Spring Kit for Flat Trigger System by Henning The trigger return spring kit is designed specifically for the Henning Flat Trigger System for Tanfoglio. Will not work with factory or other aftermarket triggers.The 3-spring kit includes... MSRP: Was: Now: $29.95 Add to Cart
TTI Ultimate Connector for Glock 42 / 43 by Taran Tactical TTI Ultimate Connector fits Glock 42 / 43 by Taran Tactical Material: SAE 1075 Spring Steel heat treated to 50 Rc, Electroless Nickel plate per MIL-C-26074E (military standard) and baked to removeembrittlement. DISCLAIMER: This product is not... MSRP: Was: Now: $24.99 Add to Cart
Walther Guide Rod Control Lever by ZR Tactical Walther Guide Rod Control Lever by ZR Tactical Simplify installation of flatwire springs 1 piece 6061 aluminum This rod will simplify loading the flatwire springs onto our uncaptured guide rods. Simply insert this lever from the front to align... MSRP: Was: Now: $12.99 Add to Cart
Walther Q5 | Q4 Match Steel Frame (SF) GridLOK Brass Grips Walther PPQ Q5 | Q4 Steel Frame (SF) GridLOK Brass Grips These grips are CNC machined from solid brass for added weight. Our Walther Q5 | Q4 Match SF Thin grips are thinner and smaller than the stock grips. We have reduced the back strap,... MSRP: Was: Now: $139.95 Choose Options
1911 & 2011 Forged Slide Stop by Ed Brown 1911 & 2011 Forged Slide Stop by Ed Brown An exact copy of our original slide stop design we have produced for decades, now fully machined from a forging. For positive, last round engagement and tighter, longer-lasting lockup with custom barrels... MSRP: Was: Now: $59.95 Choose Options
1911 40 S&W Stainless Steel Flex Magazine Follower by Tripp Research 1911 40 S&W Stainless Steel Flex Magazine Follower by Tripp Research Stainless Steel Flex Follower used in 9R-10MM-RG, 10R-10MM-RG, 10R-38S-RG. MSRP: Was: Now: $6.95 Add to Cart
1911 Hammer Pin by Dawson Precision 1911 Hammer Pin by Dawson Precision MSRP: Was: Now: $2.49 - $2.99 Choose Options
Apex Ultimate Striker Block for M&P, M&P M2.0 and M&P Shield Apex Ultimate Striker Block for M&P, M&P M2.0 and M&P Shield What It Does The Apex Ultimate Striker Block Kit is designed to work in conjunction with the Apex Fully Machined Sear. The geometry and dimensions of our striker safety... MSRP: $40.00 Was: Now: $38.00 Add to Cart
CGW CZ Tactical Sport Hammer Kit by Cajun Gun Works CGW CZ Tactical Sport Hammer Kit by Cajun Gun Works Full width direct replacement full Race Hammer Kit with all the parts needed. This kit will actually increase the SA pull weight to average of 2.5#’s. The factory pull of 1.5#’s... MSRP: Was: Now: $139.00 Add to Cart
CZ P-10 / P10 Trigger Bar Disconnector CZ P-10 / P10 Trigger Bar Disconnector CZ Part 0550031001 MSRP: Was: Now: $18.00 Add to Cart
Ed Brown 1911 Perfection Hammer Strut Ed Brown 1911 Perfection Hammer Strut - 823-P Our Perfection Hammer Strut offers improved geometry based on over 50 years of experience, and is fully machined from bar stock to the highest standards. Designed for a lifetime of performance, it is an often... MSRP: Was: Now: $16.95 Add to Cart
EGW 1911 Oversized Firing Pin Stop Series 70 9/38/40/10 - Stainless Steel EGW 1911 Oversized Firing Pin Stop Series 70 9/38/40/10 - Stainless Steel Material: Stainless SteelCaliber: 9/38/40/10mmSeries: 70Hardness: 48 RcDrop In: NoEGW firing pin stops are wider than normal to prevent extractor from... MSRP: Was: Now: $20.00 Add to Cart
Limcat Custom 1911 / 2011 Extended Ejector Limcat Custom 1911 / 2011 Extended Ejector Extended Length Compatible with 9mm, .38 Super, .40 S&W Hardened Steel for Durability and Strength Blued Black Finish CNC Machined for Precision Proudly Made in the USA MSRP: Was: Now: $29.99
MBX "Ultra Max" Replacement Spring for Glock MBX "Ultra Max" Replacement Spring for Glock *For Use in Conjunction with MBX Ultra Max Follower Factory Glock Tube & 140 Extension for 24 rounds*IS NOT DESIGNED TO FIT ON FACTORY FOLLOWER Spring only Must use MBX Ultra Max... MSRP: Was: Now: $12.00 Add to Cart
MBX "Ultra Max" Spring & Follower for 170mm 2011 & Double Stack 1911 MBX "Ultra Max" Spring & Follower for 170mm 2011 & Double Stack 1911 Magazines MBX 'ULTRA MAX' SPRING & FOLLOWER SETS FORMBX 170MM 2011/1911- 30+ 1 RoundsIMPROVE YOUR MBX MAGAZINE WITH “MBX ‘ULTRA MAX’ SPRING... MSRP: Was: Now: $19.95 Add to Cart
S&W M&P Optic Plate for Aimpoint ACRO & Steiner MPS by Forward Controls Design S&W M&P Optic Plate for Aimpoint ACRO & Steiner MPS by Forward Controls Design OPF-SW, ACRO is only guaranteed to work with Aimpoint ACRO P1 and P2, and Steiner's MPS. We have not tested it with the cheap Chicom sights under different... MSRP: Was: Now: $80.35 Add to Cart
Sig P320 X-Universal™ 10-30 Magwell by Align Tactical® Sig P320 X-Universal™ 10-30 Magwell by Align Tactical® The Align Tactical® X-UNIVERSAL™ 10-30 MAGWELL provides an enlarged funnel with patent-pending Over-Travel Compensating Guide¹, for the unique ability to accept... MSRP: Was: Now: $94.00 Add to Cart
Springfield Armory Prodigy Optic Adapter Plate for EOTECH EFLX by CHPWS Springfield Armory Prodigy Optic Adapter Plate for EOTECH EFLX by CHPWS THIS PLATE HAS AN INTEGRATED REAR SIGHT SPECIFICATION: Material: Aluminum. All mounting hardware is Stainless Steel Finish: Plates are MIL-SPEC Type III Hard Anodized... MSRP: Was: Now: $137.45 Add to Cart
TAC Trigger Kit for Walther Pistols by Overwatch Precision TAC Trigger Kit for Walther Pistols by Overwatch Precision Overwatch Precisions TAC Trigger kit for Walther Q4, Q5 SF, and PPQ pistols feature OP's proven TAC trigger design. Included in the kit is a NP3'ed and CNC-tuned OEM bar complete with two... MSRP: Was: Now: $135.00 Choose Options
