ICM Springfield Prodigy RMR / SRO / Holosun Adapter Plate with Back Up Iron Sight by Impact CNC Machine

Impact CNC Machine is pleased to offer these Springfield Prodigy Steel Mounts for the following optic footprints:

• Trijicon RMR
• Trijicon SRO
• Holosun 507c/508T
• Holosun 507 Comp

These are made of carbon steel, and backup sights are built in to allow a lower 1/3 co witness without blocking the focal plane. Cerakoted graphite black, comes with mounting screws for each optic. 

Please note: The thread pitch on the plate is 6/32 (where you mount your optic). The thread pitch on your slide (where you mount the plate) is 6/48. The factory short screws (6/48) will work great with this plate. Please do not try to install the screws labeled for each optic in the holes in the slide. As always, clean the threads and apply Loctite to all threads; however, we do not recommend red Loctite in either case (plate-to-slide or optic-to-plate). Blue 242/243 will work well.