S&W M&P M2.0 Metal Frame Flat-Faced Forward Set Trigger Kit by Apex Tactical
Nothing compares to the performance that comes from the patented Apex Forward Set Trigger Kit. This kit is engineered to provide the M&P M2.0 pistol owner with a smooth, consistent trigger pull with the advantages of shorter over-travel and shortened trigger reset. Using a combination of the Apex springs and factory sear and trigger return springs allows the user to set the trigger pull weight within a range suitable for duty/carry down to a weight desired for competition.
When installed together, this drop-in trigger kit will:
- Reduce trigger pull weight by approximately 2 lbs.
- Reduce overall trigger travel by approximately 40%
- Reduce trigger pre-travel, over-travel and reset distance
- Smooth uptake and reset
- Deliver a crisp trigger break
– Maintain factory safety values with a center mounted pivoting safety
- Direct drop-in replacement parts, no fitting required
Type 3 Trigger Differences
The Type 3 Trigger for the M&P M2.0 features a visually distinct design that sets it apart while maintaining the same excellent performance as our classic trigger. Features of the Type 3 triggers include:
- Chamfers at the front corners (classic trigger has a radius on the front corners)
- This provides for a narrower trigger feel without mechanically changing the functional surfaces
- Additional decorative face cuts on the visible sides of the trigger
- Same performance as the classic line, just a different look
Drop Testing
These kits have been tested “Drop Safe” according to Apex’s Drop Test Protocol in each, size and configuration of the M&P M2.0 this kit is spceified to fit into.
For Use In These Guns
For use in Smith & Wesson M&P M2.0 Metal Frame pistols including the “Competitor” and “Metal” frame models.
Does Not Fit These Guns
Not for use in original M&P models with polymer frames, or in any M&P Shield models
What's Included
1 ea. (13 total pieces in the package):
Aluminum Flat-Faced Forward Set Trigger
-Metal Frame Specific Safety included
Apex Forward Set Sear Actuator
Apex Fully Machined 2-Dot Sear
Ultimate Striker Block Kit (Striker Block, Spring and Apex Rear Sight Tool)
Forward Set Spring Kit for M2.0 (Heavy Sear Spring, Duty/Carry Sear Spring, Heavy Trigger Return Spring, Duty/Carry Trigger Return Spring, Polymer Slave Pin, and Sear Plunger*)
*You must install the Apex provided Sear Plunger with the trigger kit. We include a Sear Plunger with this kit, though the factory configuration does not utilize a Sear Plunger, the Orange spring paired with our plunger matches the force of the factory Green spring without a plunger
Installation Resources
Click here to view approximate results using various spring combinations