UniqueTek Spent Primer Chute for the Dillon Square Deal B (SDB) Press

The SDB Spent Primer Chute™ replaces the blue plastic spent primer cup on the Dillon Square Deal 'B' reloading press. Spent primers are routed through clear PVC tubing into any convenient waste container. The SDB Spent Primer Chute™ completely covers the spent primer ejection port, creating a fully enclosed pathway for spent primers ... so they simply can't bounce out!

No more spent primers bouncing out and onto the floor when you reload!

Comes with 3 feet of clear PVC tubing, long enough to route spent primers to a container on, or under, your reloading bench. Route it to a 5-gallon paint pail and you won't need to empty the spent primers for a very long time! If you use a strong mount, you can even drill a 1/2" hole directly under the press, run the PVC tubing through the hole, and place a container under your reloading bench where it is out of the way.

Included:
— SDB Spent Primer Chute™ - Custom molded in strong, durable Black HDPE.
— 3 Feet of Clear 1/2" PCV Tubing
— Installation Instructions

Easy Installation:
1. Remove the Spent Primer Cup and Spent Primer Cup/Return Bracket.
2. Align holes of SDB Spent Primer Chute™ with those of the Spent Primer Cup/Return Bracket and install using the original screws.
3. Attach the tubing to the SDB Spent Primer Chute™ and route to any convenient container under your reloading bench.