Tanfoglio / EAA / IFG Firing Pin for SA/DA by Henning
Our Tanfoglio (EAA Witness) Large Frame Firing Pin is a performance firing pin designed for competition and reliability. It is the lightest and fastest firing pin available for the Tanfoglio (EAA Witness in USA) and weighs 27% lighter than the factory pin. It is made out of 420 Stainless steel and has a Rockwell hardening of 50 ! it eliminates light strikes and allows for the use of light hammer springs.
You can combine this spring with our Wolff Hammer Spring Kit (13lb, 14lb, 15lb and 16lb) for a lighter trigger pull, yet 100% ignition. If you like to use Rifle Primers, you have to use the Henning XL firing pin to set them off.
The Gen5 large frame Tanfoglio Extended Firing Pin (pictured) is our latest design adapted to work with the firing pin safety in the Match, Limited, Limited Pro, Poly/Steel, and Compact. The design has a fluted and hollow design that reduces weight and makes it more "aero-dynamic" which reduces air-flow pressure and makes it move faster when it's being pushed from the hammer to the primer. It is optimized to work with the firing pin safety, and it also puts a pre-pressure on the firing pin spring which "primes' the firing pin to GO!
The Gen3 large frame Tanfoglio Extended Firing Pin is still an option for the newer EAA Stock 2 and Stock 3 Tanfoglio models.
The Small frame firing pin works for small frame Tanfoglio models only and should only be used for Single Action.
Important Warning: Modification to your firearm may nullify the manufacturers warranty. This product must be installed by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
5 Reviews
-
You pick the one right tool
Don’t fuck around. This is the firing pin that lights the primers 99%+ of the time. I’ve had the EGD, PD, factory, and they all fail when compared to the Henning. After 4 S2’s, this is the only pin I’ll place in my pistols.
-
Henning Firing Pin for EAA / Tanfoglio Witness Large Frame DA/SA
I have a Witness Stock III Extreme that I shoot in USPSA. The factory firing pin has always seemed to give me a lot of light primer strikes. Which is no bueno. Not fun in practice and no good during a match. This extended pin seems to solve all those issues.
-
YOU WILL NEED THIS FOR THE BEST TRIGGER PULL
PAIRED WITH THE LIGHT FIRING PIN AND HAMMER SPRING. WITH THE STOCK FIRING PIN FOR THE STOCK II XTREME AND LIGHT SPRINGS THE PRIMERS WOULD NOT HAVE CONSITANT INITION. IT IS LIGHTER SO IT DOES TAKE LESS FORCE TO SLAM IT INTO THE PRIMER HOWEVER WITH LIGHT XTREME FP SPRING IT DOES STACK THE FIRING PIN. I DID NEED TO CUT OFF THREE COILS FOR 100% INGITION. ALSO HIGHLY RECOMEND BOLO INTERUPER AND HENNING FLAT TRIGGER.
-
Xtreme and stock pins both pop harder primers
Well made, but the lighter Henning pins need stronger hammer springs than the stock and xtreme pins.
-
The best firing pin for a stock 2
Does every thing that it is advertised to do and doesnt drag on the firing pin block with zero fitting. Awesome product.
