The BOSS Dropped & Offset DOH Holster by Ben Stoeger Pro Shop
This holster is called the BOSS for a reason. Here at the Pro Shop, we get pissed off if our stuff isn't quite right. Every other holster on the market has some problem that we found annoying. So we made our own. BOOM.
This set includes the BOSS DOH holster hanger. This hanger is stable yet adjustable. It holds the gun in USPSA legal position and can be mounted higher in order to be Single Stack legal.
This holster also comes with thumb screws as standard.
You can use the Comp-Tac PLM, Blade-Tech Tek-Lok, Safriland ELS, QLS, or the standard BOSS belt mount.
Holster Only!
CZ Tactical Sport option is not for the Orange Model
What are the differences in the Belt Mount Options?
We offer a few options for belt mounts on the Boss holster. The standard aluminum belt plate will come with all of the holsters regardless if you choose one of the options mounts. Something to consider if you go with a non-standard belt mount you may want to go with a shorter Offset Spacer like the 1/4" to stay withing the USPSA rules.
|
The Boss Standard Belt Mount is included with all orders. This belt plate is cut for a standard 1.5" competition belt (DAA, CR Speed, Ghost). The spacing between the screws will accommodate a 1.75" belt. |
The Blade-Tech Tek-Lok Belt Mount is a great Quick Detach option. These mounts are adjustable and can accommodate 1.25"-2" belts We generally recommend going with the 1/4" offset spacer option with this mount. |
|
The Comp-Tac PLM Belt Mount is a great Quick Detach option. These mounts are adjustable and can accommodate 1.25"-2" belts We generally recommend going with the 1/4" offset spacer option with this mount |
The Safariland QLS Belt Mount work with the QLS Receiver. You can quickly swap holsters when using the Safariland QLS system. This option includes the fork only. We generally recommend going with the 1/4" offset spacer option with this mount |
Which Offset length should I choose?
This refers to the length of the spacers between the long Boss plate and the Y-Plate that attaches to the holster. The 1/2" spacers are a pretty safe bet for most firearms out there to keep you within the rules for USPSA.
If you go with one of the options mounts (Tek-Lok, PLM, ELS) we would recommend choosing the 1/2" spacers to keep your holster within the rules for USPSA.
We have seen the 3/4" work well for most models, and may work with Tek-Lok & PLM mounts.
We have found the 1" spacers to work with most models but you should measure your setup to insure it falls within the USPSA rules.
You can always just buy the Spacer Hardware Kit here and try the other options.
What is the optional Baller Ball Joint?
Upgrade your Boss Holster Hanger with the new release from Shockbottle, the Boss Baller Ball Joint.
This ball joint upgrade for your Boss Hanger allows you to adjust the angle of the holster and still raise and lower it as you expect with the Boss Holster Hanger.
You can use the ball joint instead of the spacers on your current rig!
 |
 |
What is the optional Aluminum Thigh Pad?
Comfort and Adjustability Boss Holster Hanger Aluminum Thigh Pad features a unique design that allows you to adjust the spacing of your Boss holster hanger to your personal preference, providing maximum comfort and flexibility.
 |
 |
113 Reviews
-
A little more work than I expected.
my holster was actually shipped to someone else, and I received his holster instead. Coincidentally, we both shoot at the same club and, once we figured out the error, we were able to meet up and exchange products. So, I finally had a chance to try out my new holster a couple days later. It met my expectations. The BOSS hanger is nice, although I wish the back of the belt mount was comprised of two thin bars as opposed to a solid plate so that it might allow for more velcro to connect.
-
Shot USPSA with new holster 2 days after receiving it. Perfect.
Works. Base pad very cool.
-
More Boss... like MFCEO kinda BOSS
Aptly named the Boss holster... just mounting this on your belt offers you a certain kind of swagger to your gait. People see this and say "he listens to Ben's podcast... he must read Doodie... he's gotta be a real baller"... then they see your silky smooth draw - where your thumb is already forward... they watch the perfect thumbscrew retention release your plastic fantastic as your support hand comes across your body and the union of both hands melds into the perfect crush grip... the awe inspiring presentation to the target from this holster makes everyone hold their breath in anticipation... Then you plug the no shoot, drop 2 D's and shoot to slide lock on the damn popper... look - the holster makes the draw great - the rest is up to you.
-
Works well and doesn't suck!
This is my 4th BOSS holster. I keep buying them because, quite frankly, they don't suck. They work better than anything available on the market.
-
great!
Great upgrade for my competition rig. The offset is key to a faster draw... Especially when you have a little extra weight around the middle to deal with. This set up offers plenty of customization and options. Will gladly purchase again!
-
Simple, affordable and effective.
I've purchased two of these, one for my M&P and the other for a 1911. Ben took simple holster designs and made them better.
-
Best holster for production i have ever used!
Bought this to replace my standard blade tech set up. Immediately noticed my draw times drop! Solid construction! Ben Stoeger Pro shop's customer service is top notch and there email responses are lighting fast! Highly recommend the holster as well as the pro shop! Thanks again guys, you're awesome! Boom!
-
great product,perfect for USPSA
best drop offset hanger and holster combination i have ever used
-
Whats not to like.....
This is the best drop offset hanger and holster combination i have ever used. It just plan works well.
-
Great holster setup!
Used my new Boss setup at a USPSA match this past weekend, worked great. The Boss really allows you to get a great grip on the draw....I'm a big fan! Shipping was quick. I live in Washington state, placed my order late on a Tues. and received everything Fri. morning.
-
best competition holster bar none
Awesome holster. Very solid build & easily configured to ur lliking for smooth, fast draws. Have used multiple drop/offset holsters from bladetech, comptach, gcode & custom kydex. The boss easily trumps them all. Absolutely no flex or wobble during draws. At $99 the value is incredible as well. Top notch stuff from Ben Stoeger.
-
Great Holster
I bought this to replace a cheap blade-tech that came with my M&P in the range and carry kit. I'm amazed at how much sturdier this is and having a drop/offset has improved my draw times.
