BSPS BOSS DOH Holster, 3 x CR Speed Magazine Pouches & CR Speed Ultra 2 Belt Combo
3 x CR Speed Versa 2 Magazine Pouches by Rescomp
- Fits most popular double stack magazines
- Select "Yes" on second option if you are using Beretta PX-4, CZ P-07, P-09, P-10, Tactical Sport, TS2, Czechmate, Sig Sauer P320, S&W M&P or Tanfoglio (Large Frame) magazines
- Available Colors : Black, Red, Blue, Grey, White, Pink, Orange, Green
1 x CR Speed Ultra II (2) Competition Belt by Rescomp
- Proven Performance "Rigid & Durable"
- Supplied with both Inner & Outer Belt.
- Black Only
1 x BSPS BOSS Holster
- includes thumb screws
We recommend measuring the spacing of the gun to the belt to ensure it falls within the rules of the sport and division.
We have found the standard spacers (1/2") will fall within the spacing rules so long as you are using the standard belt mount.
IMPORTANT: How to select the correct belt size:
CR Speed belts are manufactured true to waist size - For best fit, Measure waist where rig / pants loops will be. This will be correct Size.
Pants Size is not a reliable way for determining belt Size - It is not advisable to do so -
Example 1: if you have a 38" or 97cm waist you can order the 38" - 97cm size belt & will have 9" or 23cm overlap. The overall length of a Eg: 38" - 97" Belt is actually 46.5" - 118cm long. So sufficient overlap has already been included.
Example 2: If your waist size is slightly larger than Eg: 38" - 97cm. Or if you want or require additional overlap, you may want to order a size 40" - 102cm Belt "this has an actuall overall length of 49" -124cm.
The pre calculated overlap applies across the range of belt sizes we manufacture.
Buyers may exchange the belt for a different sizes but the buyer is responsible for shipping both ways.
CZ Tactical Sport option is not for the Orange Model or TS2
What are the differences in the Belt Mount Options?
We offer a few options for belt mounts on the Boss holster. The standard aluminum belt plate will come with all of the holsters regardless if you choose one of the options mounts. Something to consider if you go with a non-standard belt mount you may want to go with a shorter Offset Spacer like the 1/4" to stay withing the USPSA rules.
|
The Boss Standard Belt Mount is included with all orders. This belt plate is cut for a standard 1.5" competition belt (DAA, CR Speed, Ghost). The spacing between the screws will accommodate a 1.75" belt. |
The Blade-Tech Tek-Lok Belt Mount is a great Quick Detach option. These mounts are adjustable and can accommodate 1.25"-2" belts We generally recommend going with the 1/4" offset spacer option with this mount. |
|
The Comp-Tac PLM Belt Mount is a great Quick Detach option. These mounts are adjustable and can accommodate 1.25"-2" belts We generally recommend going with the 1/4" offset spacer option with this mount |
The Safariland QLS Belt Mount work with the QLS Receiver. You can quickly swap holsters when using the Safariland QLS system. This option includes the fork only. We generally recommend going with the 1/4" offset spacer option with this mount |
Which Offset length should I choose?
This refers to the length of the spacers between the long Boss plate and the Y-Plate that attaches to the holster. The 1/2" spacers are a pretty safe bet for most firearms out there to keep you within the rules for USPSA.
If you go with one of the options mounts (Tek-Lok, PLM, ELS) we would recommend choosing the 1/2" spacers to keep your holster within the rules for USPSA.
We have seen the 3/4" work well for most models, and may work with Tek-Lok & PLM mounts.
We have found the 1" spacers to work with most models but you should measure your setup to insure it falls within the USPSA rules.
You can always just buy the Spacer Hardware Kit here and try the other options.
What is the optional Baller Ball Joint?
Upgrade your Boss Holster Hanger with the new release from Shockbottle, the Boss Baller Ball Joint.
This ball joint upgrade for your Boss Hanger allows you to adjust the angle of the holster and still raise and lower it as you expect with the Boss Holster Hanger.
You can use the ball joint instead of the spacers on your current rig!
 |
 |
What is the optional Aluminum Thigh Pad?
Comfort and Adjustability Boss Holster Hanger Aluminum Thigh Pad features a unique design that allows you to adjust the spacing of your Boss holster hanger to your personal preference, providing maximum comfort and flexibility.
 |
 |
