The BOSS Dropped & Offset DOH Holster by Ben Stoeger Pro Shop
This holster is called the BOSS for a reason. Here at the Pro Shop, we get pissed off if our stuff isn't quite right. Every other holster on the market has some problem that we found annoying. So we made our own. BOOM.
This set includes the BOSS DOH holster hanger. This hanger is stable yet adjustable. It holds the gun in USPSA legal position and can be mounted higher in order to be Single Stack legal.
This holster also comes with thumb screws as standard.
You can use the Comp-Tac PLM, Blade-Tech Tek-Lok, Safriland ELS, QLS, or the standard BOSS belt mount.
Holster Only!
CZ Tactical Sport option is not for the Orange Model
What are the differences in the Belt Mount Options?
We offer a few options for belt mounts on the Boss holster. The standard aluminum belt plate will come with all of the holsters regardless if you choose one of the options mounts. Something to consider if you go with a non-standard belt mount you may want to go with a shorter Offset Spacer like the 1/4" to stay withing the USPSA rules.
|
The Boss Standard Belt Mount is included with all orders. This belt plate is cut for a standard 1.5" competition belt (DAA, CR Speed, Ghost). The spacing between the screws will accommodate a 1.75" belt. |
The Blade-Tech Tek-Lok Belt Mount is a great Quick Detach option. These mounts are adjustable and can accommodate 1.25"-2" belts We generally recommend going with the 1/4" offset spacer option with this mount. |
|
The Comp-Tac PLM Belt Mount is a great Quick Detach option. These mounts are adjustable and can accommodate 1.25"-2" belts We generally recommend going with the 1/4" offset spacer option with this mount |
The Safariland QLS Belt Mount work with the QLS Receiver. You can quickly swap holsters when using the Safariland QLS system. This option includes the fork only. We generally recommend going with the 1/4" offset spacer option with this mount |
Which Offset length should I choose?
This refers to the length of the spacers between the long Boss plate and the Y-Plate that attaches to the holster. The 1/2" spacers are a pretty safe bet for most firearms out there to keep you within the rules for USPSA.
If you go with one of the options mounts (Tek-Lok, PLM, ELS) we would recommend choosing the 1/2" spacers to keep your holster within the rules for USPSA.
We have seen the 3/4" work well for most models, and may work with Tek-Lok & PLM mounts.
We have found the 1" spacers to work with most models but you should measure your setup to insure it falls within the USPSA rules.
You can always just buy the Spacer Hardware Kit here and try the other options.
What is the optional Baller Ball Joint?
Upgrade your Boss Holster Hanger with the new release from Shockbottle, the Boss Baller Ball Joint.
This ball joint upgrade for your Boss Hanger allows you to adjust the angle of the holster and still raise and lower it as you expect with the Boss Holster Hanger.
You can use the ball joint instead of the spacers on your current rig!
 |
 |
What is the optional Aluminum Thigh Pad?
Comfort and Adjustability Boss Holster Hanger Aluminum Thigh Pad features a unique design that allows you to adjust the spacing of your Boss holster hanger to your personal preference, providing maximum comfort and flexibility.
 |
 |
113 Reviews
-
Perfect
The holder sits perfect and tight on the belt, no movement in the holster when presenting the weapon. the Bladetech holster is perfect for my P09. awesom product.
-
Fast, Easy and Reliable
So far so good, installed without even thinking hard, and it provides a stable and reliable platform for the holster. the micro adjustments seem to be making a big difference in my draw as well, who would think a half inch would make that much difference.
-
Amazing product!
I ordered the holster and hanger setup for 1911 single stack gun and wish I would of found this earlier! Very solid, awesome adjustability and simple a perfect combo in my opinion. Thanks guys for the awesome product!
-
As good as it gets
Super clean to draw from with no snagging. The BOSS hanger puts it in just the right place.
-
Like It!
I like the holster so far. It's a big improvement over the carry holster I had been using with high retention. I wasn't sure how I would like the drop and offset, but it is quite rigid, and puts the gun at a better (lower) height. Shipping was faster than expected.
-
It's a good holster but you may have to fit it
This is my second Boss Dropped & Offset Holster. Both holsters required cutting out around the mag release area to avoid activating the mag release in the holster. In addition the second holster required some filing to get the gun to seat properly in the holster. Once this was all done both holsters work very well. To be fare other shooters I've spoken with describe fitting problems with other brands of competition holsters they've bought.
-
Overall Design is Fantastic but Thumb Screws Are Hard to Turn
The overall product is really good. It puts the gun at the perfect level for USPSA production matches. I got it with the Comp-Tac holster. I have not actually used this in competition yet since I am still waiting on my gun belt and it is still a couple weeks away from a local match. The only problem I have had is that the thumb screws were really difficult to tighten down to increase the retention in the holster. I think the spacers in the holster are just too large. I had to really tighten it down to get the audible click and be able to actually feel retention.
-
Wow
You don’t know what you’re missing. Super rigid. Makes a good holster the best. Genius.
-
This one' is gonna be hard to beat.
Hesitant to buy, I didn't need another rig. Glad I did. Superb craftsmanship and quality. This is going to give you the competitive edge you're looking for.
-
Glad I listened
Bought this holster for my Shadow 2 per friends' recommendation (for USPSA production and Steel matches). I am glad I listened. I have used this for multiple matches. The screws come really handy. The holster sits tight. The height is adjustable (i used the lowest setting), so is the cant. Awesome product.
-
Great holster, nice spacing from body
Really like this holster. Using it with the Double Alpha belt package.
-
IPSC Starter
Great product holds gun perfectly. Well made quality item.
