EAA / Tanfoglio Magazine Spring & Follower Kit by Grams Engineering
This "Follower Kit T" is pre-tuned and requires no modifications for proper feeding function in a magazine tube of correct tolerances and no spacer plate installed inside the back of the mag tube.
The follower is designed for slide-lock function, but due to tolerance stacking, material from the slide-lock paw, follower, or both may need to be removed for proper function. Tuning of the mag tube may be required if the desired reliability or round count is not obtained.
• FKK38-11 (Follower Kit - for EAA/Tanfoglio 38sup mag, manufactured by Mec-Gar (tube marked K38 or 38-LF). Designed for mag OAL that measure up to 145mm long (kit includes Grams Format Follower (K38) and 11 coil spring).)
• FKK40-11 (Follower Kit - for EAA/Tanfoglio 40sw mag, manufactured by Mec-Gar (tube marked K40 or 40-LF, spacer plate installed). Designed for mag OAL that measure up to 145mm long (kit includes Grams Format Follower (K40) and 11 coil spring).)
• FKK9-11 (Follower Kit - for EAA/Tanfoglio 9x19 mag, manufactured by Mec-Gar (tube marked K9 or 9-LF, spacer plate installed). Designed for mag OAL that measure up to 145mm long (kit includes Grams Format Follower (K9) and 11 coil spring).)
3 Reviews
-
Fixed my problem
I was having problems with the slide cycling when I loaded 17 rounds in the magazine. I replaced the follower and spring with the new kit and the problem went away. I had to trim a little off the slide stop paw but the instructions that came with the follower kit stated that I might have to. This product was exactly what I needed. Thanks!
-
Great product
These followers work perfectly with the Henning mag extension.
-
Better design, works like it should
This follower & spring set is a better design than the factory options for the 10mm Witness. eased loading forces, more positive slide lock when empty, & just works like it should.
