Springfield Prodigy Ejector by EGW
Fits: Springfield Prodigy 9mm pistols
Component: Ejector
Installation: Designed as a Drop-In Replacement
Material: Carbon Steel
Finish: Blue
SKU: 10014
Made By: Evolution Gun Works
Unlike EGW's oversized gunsmith-fit 1911 ejectors, this ejector was designed specifically around the Springfield Prodigy 9mm and is intended to install as a drop-in replacement.
Product Overview
The EGW Drop-In Ejector for the Springfield Prodigy was developed specifically for shooters who need a replacement ejector without starting with an oversized gunsmith-fit part.
This ejector is designed around the dimensions of the Springfield Prodigy 9mm, allowing it to serve as a direct replacement for the factory-style ejector.
Instead of requiring the extensive shaping, shortening, and fitting associated with a traditional oversized 1911 ejector, the EGW Prodigy ejector is manufactured specifically for this application and is intended to be a drop-in part.
The ejector is machined from carbon steel and receives a traditional blued finish for a durable replacement component that matches the dark finish of the Prodigy's slide and controls.
- SKU: 10014
- Firearm: Springfield Prodigy
- Platform: Double-Stack 1911
- Caliber: 9mm
- Component: Ejector
- Installation Type: Drop-In
- Material: Carbon Steel
- Finish: Blue
A Drop-In Ejector for the Springfield Prodigy
Traditional replacement 1911 ejectors are often manufactured oversized so a gunsmith can fit the body, nose, and other surfaces to a specific frame and slide.
That is not the purpose of this ejector.
EGW developed this version specifically around the Springfield Prodigy 9mm so Prodigy owners have a replacement ejector intended to install without the extensive custom fitting associated with EGW's oversized gunsmith ejectors.
This Prodigy Ejector: Designed specifically around the Springfield Prodigy 9mm for drop-in replacement.
EGW Oversized Ejectors: Manufactured with additional material so a gunsmith can custom-fit and tune the ejector to an individual 1911.
Designed Specifically for the Prodigy 9mm
This is not a generic 1911 ejector being marketed for the Prodigy. The part was developed specifically for the Springfield Prodigy 9mm platform.
The application-specific design makes it a straightforward option when replacing a damaged, worn, or otherwise unwanted factory ejector.
This ejector is designed specifically for Springfield Prodigy pistols chambered in 9mm. It should not be treated as a universal replacement ejector for every 1911 or double-stack 1911 platform.
Machined Carbon Steel Construction
The EGW Prodigy ejector is manufactured from carbon steel for a durable replacement component in the pistol's ejection system.
The ejector receives a blued finish for a traditional dark appearance that blends naturally with the Springfield Prodigy's slide, frame, and other dark-finished components.
What Does the Ejector Do?
The ejector works together with the extractor to remove fired cartridge cases from the pistol.
As the slide moves rearward, the extractor holds the case against the breech face. The case then contacts the ejector, causing it to pivot out through the ejection port.
Because the ejector is a key component in the pistol's extraction and ejection cycle, proper installation and function should always be verified after replacement.
Why Choose the EGW Prodigy Ejector?
- ✔ Designed specifically for the Springfield Prodigy
- ✔ Designed for 9mm pistols
- ✔ Intended as a drop-in replacement
- ✔ No oversized gunsmith-fit body to start from
- ✔ Carbon steel construction
- ✔ Blued finish
- ✔ Ideal for replacing a worn or damaged factory ejector
- ✔ Purpose-built for the Prodigy platform
- ✔ Manufactured by Evolution Gun Works
Installation & Fitment
This ejector was designed as a drop-in replacement for the Springfield Prodigy 9mm.
Because firearm dimensions can vary slightly due to manufacturing tolerances, the installer should still verify proper seating, retention, slide clearance, and ejection function after installation.
Minor fitment may occasionally be required due to manufacturing tolerances.
This ejector is manufactured specifically for the Springfield Prodigy and is designed as a drop-in replacement. As with any firearm component, dimensional variations between individual pistols can occasionally require minor fitment.
Frequently Asked Questions
What pistol is this ejector designed for?
This ejector is designed specifically for the Springfield Prodigy.
What caliber does it fit?
This version is designed for Springfield Prodigy pistols chambered in 9mm.
Is this a drop-in ejector?
Yes. This ejector was designed specifically as a drop-in replacement for the Springfield Prodigy.
Is this the same as EGW's oversized gunsmith-fit ejector?
No. EGW's oversized ejectors are intentionally manufactured with additional material for custom gunsmith fitting. This model is manufactured specifically around the Springfield Prodigy and is intended as a drop-in replacement.
What is the ejector made from?
The ejector is manufactured from carbon steel.
What finish does it have?
This version has a blued finish.
Can minor fitting still be required?
It is designed as a drop-in part, but minor fitment may occasionally be required due to manufacturing tolerances between individual firearms.
WE RECOMMEND THIS PART BE INSTALLED AND CHECKED BY A QUALIFIED AND COMPETENT GUNSMITH. Verify ejector retention, slide clearance, extraction, ejection, and complete firearm function after installation and before live-fire use.
Designed specifically for the Springfield Prodigy 9mm, this EGW carbon steel ejector provides a drop-in replacement option without requiring the extensive fitting associated with traditional oversized 1911 ejectors.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, or similar processes. For more information, visit www.P65Warnings.ca.gov.
