Long's Shadow Holster

Huron Carbon Fiber Boss Holster by Long's Shadow Holster

$139.95
No reviews yet Write a Review
SKU:
LS-Carbon-Boss
Shipping:
Calculated at Checkout

Frequently Bought Together

Please choose options for all selected products

  • Choose Options

Huron Carbon Fiber Boss Holster by Long's Shadow Holster

This set includes the BOSS DOH holster hanger. This hanger is stable yet adjustable. It holds the gun in USPSA legal position and can be mounted higher in order to be Single Stack legal.

This holster also comes with thumb screws as standard.

You can use the Comp-Tac PLM, Blade-Tech Tek-Lok, or the standard BOSS belt mount.


We recommend measuring the spacing of the gun to the belt to ensure it falls within the rules of the sport and division. 


Long's Shadow Holster Huron Holster Body

     The Huron holster was designed with the goal of creating the best Competition holster with direct input from professional shooters. After tremendous trial, design, and review we released this model to give its user every advantage. Each holster is verified to the measured parameters set by USPSA/IPSC/IDPA/3-Gun division rules. Whether just a beginner or training to take a National or International Championship, you can count on your holster to perform flawlessly. This model uses .093" for solid colors and .080" for some prints and camouflage patterns.

      The Huron holster can also be configured for Tactical users who desire extreme reliability but do not require Level II retention. Selecting SRA Cut provides a more secure fit for range, training, or 3-Gun matches where dynamic movement and position are more common than not. 


Features:

Hand sanded and buffed edges for smooth insertion and extraction of your handgun

The best option for Competition and Tactical users looking for professional grade equipment. This holster is fully customizable for your lifestyle and needs. It is backed by our Limited Lifetime Warranty. 

Made in the USA


What are the differences in the Belt Mount Options?

We offer a few options for belt mounts on the Boss holster. The standard aluminum belt plate will come with all of the holsters regardless if you choose one of the options mounts. Something to consider if you go with a non-standard belt mount you may want to go with a shorter Offset Spacer like the 1/4" to stay withing the USPSA rules.

boss-standard-medium.png

The Boss Standard Belt Mount is included with all orders.

This belt plate is cut for a standard 1.5" competition belt (DAA, CR Speed, Ghost).

The spacing between the screws will accommodate a 1.75" belt.

boss-tek-lok-medium.png

The Blade-Tech Tek-Lok Belt Mount is a great Quick Detach option.

These mounts are adjustable and can accommodate 1.25"-2" belts

We generally recommend going with the 1/4" offset spacer option with this mount.

boss-plm-medium.png

The Comp-Tac PLM Belt Mount is a great Quick Detach option.

These mounts are adjustable and can accommodate 1.25"-2" belts

We generally recommend going with the 1/4" offset spacer option with this mount

boss-qls-medium.png

The Safariland QLS Belt Mount work with the QLS Receiver.

You can quickly swap holsters when using the Safariland QLS system. This option includes the fork only.

We generally recommend going with the 1/4" offset spacer option with this mount

 


Which Offset length should I choose?

This refers to the length of the spacers between the long Boss plate and the Y-Plate that attaches to the holster. The 1/2" spacers are a pretty safe bet for most firearms out there to keep you within the rules for USPSA. 

If you go with one of the options mounts (Tek-Lok, PLM, ELS) we would recommend choosing the 1/2" spacers to keep your holster within the rules for USPSA.

We have seen the 3/4" work well for most models, and may work with Tek-Lok & PLM mounts. 

We have found the 1" spacers to work with most models but you should measure your setup to insure it falls within the USPSA rules.

You can always just buy the Spacer Hardware Kit here and try the other options. 

Boss Holster Spacing

Boss Hanger Spacing Diagram


What is the optional Baller Ball Joint?

Upgrade your Boss Holster Hanger with the new release from Shockbottle, the Boss Baller Ball Joint.

This ball joint upgrade for your Boss Hanger allows you to adjust the angle of the holster and still raise and lower it as you expect with the Boss Holster Hanger.

You can use the ball joint instead of the spacers on your current rig!

BSPS Boss Holster Baller Ball Joint Parts BSPS Boss Holster Baller Rotation

What is the optional Aluminum Thigh Pad?

Comfort and Adjustability Boss Holster Hanger Aluminum Thigh Pad features a unique design that allows you to adjust the spacing of your Boss holster hanger to your personal preference, providing maximum comfort and flexibility.

BSPS Boss Holster hanger Aluminum Thigh pad Kit BSPS Boss Holster hanger Aluminum Thigh pad Kit