Ben Stoeger BSPS BOSS DOH Dropped Offset Holster Hanger Mount System
This hanger is adjustable yet stable. It will hold your holster in the position of your choosing allowing for a safe and secure draw. This holster hanger can be mounted ambidextrously making it appropriate for left and right handed shooters.
The holster can be mounted higher up, making it Single Stack legal if you desire.
This is just the holster hanger. Supply your own pouch. This is compatible with Blade Tech, GX Holster, LS Holsters, Weber Tactical and Comp Tac stuff.
What are the differences in the Belt Mount Options?
What are the differences in the Belt Mount Options?
We offer a few options for belt mounts on the Boss holster. The standard aluminum belt plate will come with all of the holsters regardless if you choose one of the options mounts. Something to consider if you go with a non-standard belt mount you may want to go with a shorter Offset Spacer like the 1/4" to stay withing the USPSA rules.
|
The Boss Standard Belt Mount is included with all orders. This belt plate is cut for a standard 1.5" competition belt (DAA, CR Speed, Ghost). The spacing between the screws will accommodate a 1.75" belt. |
The Blade-Tech Tek-Lok Belt Mount is a great Quick Detach option. These mounts are adjustable and can accommodate 1.25"-2" belts We generally recommend going with the 1/4" offset spacer option with this mount. |
|
The Comp-Tac PLM Belt Mount is a great Quick Detach option. These mounts are adjustable and can accommodate 1.25"-2" belts We generally recommend going with the 1/4" offset spacer option with this mount |
The Safariland QLS Belt Mount work with the QLS Receiver. You can quickly swap holsters when using the Safariland QLS system. This option includes the fork only. We generally recommend going with the 1/4" offset spacer option with this mount |
Which Offset length should I choose?
This refers to the length of the spacers between the long Boss plate and the Y-Plate that attaches to the holster. The 1/2" spacers are a pretty safe bet for most firearms out there to keep you within the rules for USPSA.
If you go with one of the options mounts (Tek-Lok, PLM, ELS) we would recommend choosing the 1/4" spacers to keep your holster within the rules for USPSA.
We have seen the 3/4" work well for most models, and may work with Tek-Lok & PLM mounts.
We have found the 1" spacers to work with most models but you should measure your setup to insure it falls within the USPSA rules.
You can always just buy the Spacer Hardware Kit here and try the other options.
What is the optional Baller Ball Joint?
Upgrade your Boss Holster Hanger with the new release from Shockbottle, the Boss Baller Ball Joint.
This ball joint upgrade for your Boss Hanger allows you to adjust the angle of the holster and still raise and lower it as you expect with the Boss Holster Hanger.
You can use the ball joint instead of the spacers on your current rig!
 |
 |
What is the optional Aluminum Thigh Pad?
Comfort and Adjustability Boss Holster Hanger Aluminum Thigh Pad features a unique design that allows you to adjust the spacing of your Boss holster hanger to your personal preference, providing maximum comfort and flexibility.
 |
 |
How to do mount a Safariland QLS Fork or Receiver?
The versatile Boss Holster Hanger is designed to offer multiple mounting options for the Safariland QLS system. It facilitates the attachment of the Safariland QLS Fork to the long plate that is included in the kit, thereby eliminating the need for any additional parts or unique configurations.
For those seeking a flexible mounting solution that allows for easy swapping of holsters while keeping the hanger firmly attached to your belt, we offer the Safariland Y-Plate option. With this, you can conveniently mount the Safariland QLS Receiver to the Y-Plate, as demonstrated in the photographs below.
This powerful combination of utility and adaptability makes the Boss Holster Hanger an essential tool for enhancing your holster mounting experience.
 |
 |
 |
Instructions
1. Attach Y-plate to holster body through three large holes on the Y-plate using supplied short round-head screws to the backers included with your holster.
2. Attach Y-plate to slotted hanger plate using supplied long screws and spacers (do not install lock washers yet). Screw heads should be on the rounded side of the hanger plate, one screw in a center hole and the other in the corresponding curved slot.
3. Hold belt inside belt plate cutout and install onto main hangar plate with 4 flat-head screws, solidly mounting holster and hanger to belt.
4. Test location of holster with unloaded firearm. Adjust to preferred height and tilt by changing screw positions on the main hangar plate and Y-plate. Verify position meets rule requirements
5. Mark position of long screws lightly with a pencil and then remove and re-install the long screws with a lock washer underneath the screw heads. Apply threadlocker to all screws.
* Verify firearm position meets appropriate rule requirements
- #1:
- Attach Y-plate to holster body through three large holes on the Y-plate using short round-head screws
- #2:
- Attach Y-plate to slotted hanger plate using long screws and spacers (do not install lock washers yet). Screw heads should be on the rounded side of the hanger plate, one screw in a center hole and the other in the corresponding curved slot.
- #3:
- Hold belt inside belt plate cutout and install onto main hangar plate with 4 flat-head screws, solidly mounting holster and hanger to belt.
- #4:
- Test location of holster with unloaded firearm. Adjust to preferred height and tilt by changing screw positions on the main hangar plate and Y-plate. Verify position meets rule requirements
- #5:
- Mark position of long screws lightly with a pencil and then remove and re-install the long screws with a lockwasher underneath the screw heads. Apply threadlocker to all screws.
139 Reviews
-
Buy it Now
I purchased a plastic hanger and it kept flexing when I would draw. I stumbled on this hanger and decided to buy it. My holster doesn't move at all now. There's no worries that I need to draw at a weird angle so the hanger doesn't flex. This is a great product and it's well worth the price.
-
Absolutely the best!
The hanger is completely rigid and stays that way. There's no struggling with a holster that moves around and hinders drawing or reholstering. The draw is effortless and as fast as your muscles can move. I have three, one for each competition rig I use, and I wouldn't bother with anything else. You will never regret buying the BOSS.
-
SOLID
I received this the day before a match. It took me about 1 hour to get it mounted and adjusted on my belt. It was an item that disappeared on match day. It worked flawlessly. It is a solid mount and very well made. I will not have to buy anything to replace it.
-
SOLID
I received this the day before a match. It took me about 1 hour to get it mounted and adjusted on my belt. It was an item that disappeared on match day. It worked flawlessly. It is a solid mount and very well made. I will not have to buy anything to replace it.
-
greateast set up ever
I’ve been eyeing this bad boy for a while and I mean a while. And man was it worth every dollar I spent on it. It’s sturdy , holds tight , keeps your holster is the same place and even falls under the stupid rules of idpa and you can position it in a endless amount of ways. This was by far some of the best money I have spent on a competitive shooting product besides obviously the guns.
-
What a Diffrence
The fit and finish is fantastic. I’m using it on a Blade-Tech Holster. It fits perfect, the drop-offset is spot on. I’m using this with my USPSA Limited Pistol. As soon as I installed the mount, my draw improved. I order a second one the next day. Thanks
-
Solid Versatile Mount
I was using the Blade Tech DOH hanger and found it angled the butt of the gun away from me, but also was not a very solid mount. I switched to the Boss and I have to say the mount is solid and versatile. First, the mounting plate itself sits right against my outer hip/thigh, so when I come down on the draw it's like the holster is screwed into my side, with absolutely no movement of the grip. Next, the adjustable cant allowed me to position the gun such that I no longer get hung up on the small beavertail of my M&P. Overall, this is exactly what I was looking for in a DOH mount. Awesome!
-
Buy it and profit from it!
Well made, solid and sturdy, turns the holster platform from a weakness to a strength. Very adjustable to how you want it, when all set and screwed down, this bad boy doesn't go anywhere! If you make any changes to your setup, The BOSS should be #1 on your list. I moved from a Bladetech DOH to The BOSS Hanger with a double layer Red Hill Tactical holster. Also switched from a High Torque CR Speed belt to the DAA Premium belt at the same time and I feel like a shooter reborn with all this new gear!
-
Just buy it
Skip the plastic drop offset mounts, buy the best and you won’t regret it. The consistency the BOSS hanger facilitates is immediately obvious.
-
Does exactly what I needed
This is a very solidly built product that did what i needed to - it gave me customization and control over the height and cant of my holster so that I can tune it to my needs for USPSA. I would highly recommend this to someone shooting USPSA.
-
boss offset holster hanger
Great product and price. Buy one!
-
Just buy it
Forget the bladetech DOH attachment. This is very nice product, well worth the money and the customer service is great and the shipping is fast. My only gripe is the supplied screws to attach the holster to the belt are a little short for my double alpha but not the end of the world, screws are cheap, go get longer ones to initially clamp it on your belt then replace the longer ones you bought with the supplied shorter ones one at a time so they don’t stick out the other side.
