Ben Stoeger BSPS BOSS DOH Dropped Offset Holster Hanger Mount System
This hanger is adjustable yet stable. It will hold your holster in the position of your choosing allowing for a safe and secure draw. This holster hanger can be mounted ambidextrously making it appropriate for left and right handed shooters.
The holster can be mounted higher up, making it Single Stack legal if you desire.
This is just the holster hanger. Supply your own pouch. This is compatible with Blade Tech, GX Holster, LS Holsters, Weber Tactical and Comp Tac stuff.
What are the differences in the Belt Mount Options?
What are the differences in the Belt Mount Options?
We offer a few options for belt mounts on the Boss holster. The standard aluminum belt plate will come with all of the holsters regardless if you choose one of the options mounts. Something to consider if you go with a non-standard belt mount you may want to go with a shorter Offset Spacer like the 1/4" to stay withing the USPSA rules.
|
The Boss Standard Belt Mount is included with all orders. This belt plate is cut for a standard 1.5" competition belt (DAA, CR Speed, Ghost). The spacing between the screws will accommodate a 1.75" belt. |
The Blade-Tech Tek-Lok Belt Mount is a great Quick Detach option. These mounts are adjustable and can accommodate 1.25"-2" belts We generally recommend going with the 1/4" offset spacer option with this mount. |
|
The Comp-Tac PLM Belt Mount is a great Quick Detach option. These mounts are adjustable and can accommodate 1.25"-2" belts We generally recommend going with the 1/4" offset spacer option with this mount |
The Safariland QLS Belt Mount work with the QLS Receiver. You can quickly swap holsters when using the Safariland QLS system. This option includes the fork only. We generally recommend going with the 1/4" offset spacer option with this mount |
Which Offset length should I choose?
This refers to the length of the spacers between the long Boss plate and the Y-Plate that attaches to the holster. The 1/2" spacers are a pretty safe bet for most firearms out there to keep you within the rules for USPSA.
If you go with one of the options mounts (Tek-Lok, PLM, ELS) we would recommend choosing the 1/4" spacers to keep your holster within the rules for USPSA.
We have seen the 3/4" work well for most models, and may work with Tek-Lok & PLM mounts.
We have found the 1" spacers to work with most models but you should measure your setup to insure it falls within the USPSA rules.
You can always just buy the Spacer Hardware Kit here and try the other options.
What is the optional Baller Ball Joint?
Upgrade your Boss Holster Hanger with the new release from Shockbottle, the Boss Baller Ball Joint.
This ball joint upgrade for your Boss Hanger allows you to adjust the angle of the holster and still raise and lower it as you expect with the Boss Holster Hanger.
You can use the ball joint instead of the spacers on your current rig!
 |
 |
What is the optional Aluminum Thigh Pad?
Comfort and Adjustability Boss Holster Hanger Aluminum Thigh Pad features a unique design that allows you to adjust the spacing of your Boss holster hanger to your personal preference, providing maximum comfort and flexibility.
 |
 |
How to do mount a Safariland QLS Fork or Receiver?
The versatile Boss Holster Hanger is designed to offer multiple mounting options for the Safariland QLS system. It facilitates the attachment of the Safariland QLS Fork to the long plate that is included in the kit, thereby eliminating the need for any additional parts or unique configurations.
For those seeking a flexible mounting solution that allows for easy swapping of holsters while keeping the hanger firmly attached to your belt, we offer the Safariland Y-Plate option. With this, you can conveniently mount the Safariland QLS Receiver to the Y-Plate, as demonstrated in the photographs below.
This powerful combination of utility and adaptability makes the Boss Holster Hanger an essential tool for enhancing your holster mounting experience.
 |
 |
 |
Instructions
1. Attach Y-plate to holster body through three large holes on the Y-plate using supplied short round-head screws to the backers included with your holster.
2. Attach Y-plate to slotted hanger plate using supplied long screws and spacers (do not install lock washers yet). Screw heads should be on the rounded side of the hanger plate, one screw in a center hole and the other in the corresponding curved slot.
3. Hold belt inside belt plate cutout and install onto main hangar plate with 4 flat-head screws, solidly mounting holster and hanger to belt.
4. Test location of holster with unloaded firearm. Adjust to preferred height and tilt by changing screw positions on the main hangar plate and Y-plate. Verify position meets rule requirements
5. Mark position of long screws lightly with a pencil and then remove and re-install the long screws with a lock washer underneath the screw heads. Apply threadlocker to all screws.
* Verify firearm position meets appropriate rule requirements
- #1:
- Attach Y-plate to holster body through three large holes on the Y-plate using short round-head screws
- #2:
- Attach Y-plate to slotted hanger plate using long screws and spacers (do not install lock washers yet). Screw heads should be on the rounded side of the hanger plate, one screw in a center hole and the other in the corresponding curved slot.
- #3:
- Hold belt inside belt plate cutout and install onto main hangar plate with 4 flat-head screws, solidly mounting holster and hanger to belt.
- #4:
- Test location of holster with unloaded firearm. Adjust to preferred height and tilt by changing screw positions on the main hangar plate and Y-plate. Verify position meets rule requirements
- #5:
- Mark position of long screws lightly with a pencil and then remove and re-install the long screws with a lockwasher underneath the screw heads. Apply threadlocker to all screws.
139 Reviews
-
solid construction. easy assembly. adjustable
Super fast shipping. Hassle free even with shipping to Canada. Highly recommend
-
Excellent Stability
Very secure and stable platform for my bladetech. I use this for my 3 gun rig with 2011 holster mounted on bladetech TMMS.
-
Best Option Available for DOH Mounting
The most solid and secure DOH mounting option I've found for the bladetech holster body. Far and away superior to the bladetech DOH option. Extremely solid, no flex on the draw (improving draw speed), easy installation, limitless adjustment. Succeeds where other DOH holsters fail with regards to maintaining the maximum 2" gap for USPSA legality between inner belt and grip of gun. If you're looking for the buy once/cry once adapter for your bladetech holster, look no further. After buying and trying one out for several weeks, I've switched over all my rigs to this setup.
-
Very well made
I purchased this knowing it was not made to fit my Blackhawk CQC holster that I use for action pistol shooting. I ended up having to drill some extra holes and change out one screw. It required quite a bit of effort, but I made it work. I like the option of having different length spacers and screws. This made proper fitting a lot easier. I recommend this rig for its intended applications unless you're willing to take a risk as I did. Yes, I would buy this again, but next time I'll get the right holster to begin with.
-
great product
Great product and fast delivery. Would buy againmikepizz
-
This hanger is definitely BOSS !!
Awesome hanger - rock solid and adjustable !
-
Best dropped and offset system, bar none!!!
I am a casual shooter but like to have the best products available to work with. My original holster system was a kydex paddle holster with built in belt loops. It was alright but always seemed to place the gun up too high on my waist, making drawing uncomfortable as I had to twist my arm up high to do it. So my search began for alternatives. My first thought was maybe a drop-leg holster. So I learned everything I could on them, watched many reviews, tried using one, weighed the pros and cons and decided against it. I didn't like how low they ran. So then I looked for something in between. Then I ran into the dropped and offset platform by Bladetech. That seemed to be exactly what I was looking for. It brought down the handle of my gun right to my waist. Again, I watched many reviews, browsed through sites for other reviews. It seemed like a pretty solid system. What turned me off to it was one review stating that because it was a plastic material, in high heat it gets flexible. Now, I know that I probably will not be in an area where it will be so hot that it would flex or break on me, but I didn't care. I wanted the best. So I looked for something even better. Finally, and seemingly by accident, I came across the Boss Holster Hanger. An aluminum dropped and offset system with the capability of adding a cant if needed built in? And at a decent price? What madness is this? There aren't too many YouTube reviews on it, but the ones I found were all good. So I went for it. Boy am I happy I did! It is amazing! Super sturdy, perfect waist level, perfect cant! This will more than likely outlast my holster! Worth every penny! I'll be making my own YouTube review of this soon. Highly recommend this system. Stop your search, you found the answer!
-
Awesome hanger
It keeps your holster firm and any angle you need.
-
Friggin' awesome
The hanger components are well made and solid as a rock on my limited belt. The adjustability features are simple and great for customizing to personal preferences. Right before making this review I ordered another to use with my production rig.
-
Solid, easy to install
This things looks and feels great. Easy to install with the accompanying instructional video. Going to shoot my first match with it tomorrow!
-
heard great things... still waitkng to receive
I'm sure I won't be disappointed as many have strongly suggested I get this. No need for a review, everyone loves it ... However..... On the site, it claims free shipping... I process the purchase and anxiously await my order to be sent out. I receive a follow up email the next day stating shopping cannot be free... This should be rectified with Your POS system to recognize free shipping eligibility, not something you bring up after the purchase has been made.
-
Perfect Fit!
This holster hanger has turned my Comptac holster into a perfect rig for consistent draws. I use it in the Production Division of USPSA.
